Self-Cleaning Solar Panel Spray 250ml

Application of the nanovis coating is simple when you follow these instructions:

1. Pick a clear sunny day - this will ensure the coating has 1-2 hours of UV exposure to properly cure and create the nanocrystalline layer

2. Clean your solar panels with approved cleaning products - DO NOT use carwash or a product that has a wax residedue as this will prevent nanovis from spreading evenly

3. Dry the panels - if its a sunny day it should be pretty quick, but you can use a blower or rag to dry if you're impatient.  Again make sure its a clean rag so you don't get any oil or other contaminants on the panels

4. Ensure your spray bottle is charged via its USB port

5. Spray evenly in long continous sprays across the panel in a zig zag pattern.

6. Leave for 1-2 hours in direct sunlight

7. Observe after application the somewhat oily appearance - this is normal.  You will see the anti-reflective properties immediately upon curing.

8. Test the surface by spraying a mist over the panel to observe little to no formation of water droplets.